Working diameter
Two-section probe configurations range from 0.065 mm to 0.140 mm. Single-section electrode configurations are available with working diameters of 0.077 mm, 0.106 mm and 0.120 mm.
Technology
Understanding IONIX Configurations
Explore IONIX product formats, working dimensions, shank types and configuration references used across the professional electrolysis catalogue.
Dimensions
Working dimensions for product selection
IONIX configurations are defined by working dimensions and construction references. Product category pages list the exact available measurements for each configuration.
Tip diameter
Single-section electrode configurations are available with tip diameters of 0.056 mm, 0.073 mm and 0.097 mm.
Working length
Two-section probe configurations are available with working lengths from 4.0 mm to 6.6 mm.
Insulation length
Pro Series insulation lengths range from 0.5 mm to 3.3 mm, depending on the configuration.
Product Formats
Two product formats and shank references
Two-Section Electrolysis Probes
Available in standard stainless-steel, IONIX Pro Series and Series P / Sliding configurations.
Single-Section Electrolysis Electrodes
Available in F2x–F4x and K2x–K4x product codes with Stainless Steel, Gold and Isolation configurations.
F and K shanks
F and K identify the shank type used in IONIX product configurations. Review the product category tables to select the applicable configuration.
In single-section electrode product codes, the “x” suffix identifies the single-section electrode format.
Insulation
Pro Series configuration references
IONIX Pro Series two-section probes use partial insulation configurations.
Pro IST
Shaft insulation configuration.
Pro ISB
Base insulation configuration.
Available Pro Series insulation lengths are listed for each size and shank configuration on the IONIX Pro Series product page.
Series P
Series P / Sliding
Series P is a two-section probe range with a Sliding configuration. Available configurations include F and K shank types in sizes 2 through 5, with a 0.065 mm working diameter, 4.0 mm working length and 0.5 mm insulation length.